TELL A FRIEND

  How The Laser Rack Works & 
                       How To Use

All, if not most, pool tables have existing marks on the rail surface.  More commonly known as diamonds or dots.  [see Fig. 1 below]

Fig. 1

A properly racked set of billiard balls would have the head ball positioned such that it sits right at the intersecting point A of lines 1 & 2.  This point A is where you normally find the "foot Spot" sticker affixed.  Lines 1 & 2 correspond to the existing diamonds/dots on the pool table.  [see Fig. 2 below]

Fig. 2

There are 3 lasers on the rack.  The top laser points forward and away from the balls.  The other 2 lasers point away from the left and right.  The important thing to note here is that the left & right lasers are at 90 degrees with respect to the top laser.  This ensures a perfectly positioned rack.  No more "crooked" racks!  Laser positions are precisely calibrated at our factory.  [see Fig. 3 below]

Fig. 3

Each laser projects a red dot onto the inner sides of the cushions.  Although optional, we recommend the use of alignment decals (supplied).  These are affixed to the inside of the cushions to aid in perfect alignment of the rack.  By the way, the stickers are positioned well below the contact point of the cushions and do not affect play.  [see Fig. 4 below]

Fig. 4

How To Use The Laser Rack:    [refer to Fig. 5 below]

1. Simply place the rack flat on the table surface.

2. Place your billiard balls inside the rack.

3. Position the rack w/balls by aligning the SIDE (L&R) red laser dots with the supplied alignment decals on the cushions.  DO THIS BEFORE ATTEMPTING TO ALIGN THE FRONT LASER.

4. When aligning the front laser, shift the whole rack instead of twisting.  This will keep your side lasers aligned.

5. Remove the rack from the playing surface and BREAK 'EM!

Fig. 5

If you have any questions or feedback feel free
to contact us via Email or Phone.  Thank you.

Money-Back Guarantee!

(click for details)

Only

$179!

Now Taking Orders